JASIC EVO ARC 160 PFC INVERTER WELDER – EVO 2.0 SERIES
The JASIC EVO ARC 160 PFC (EA-160) is the uprated version of the hugely popular Jasic PRO Arc series. Featuring a new large format display which is clear to see even from a distance, as well as a heavier duty more rugged shell and aggressive looks.
The EVO ARC series come with PFC as standard for increased energy efficiency. They are also auto voltage sensing and can be plugged into 110 or 230V supplies, including generators. Furthermore, the input tolerance of the Jasic EVO Arc is from 96V up to 265V meaning it will cope with being used on long extension leads where voltage drop may otherwise be an issue.
The new ClearVision technology combines a high definition led screen mounted at the optimum angle for improved visibility and increased viewing comfort. Additionally, the surprisingly lightweight structure makes this unit very portable. Switch with ease between MMA mode and Smart Lift TIG mode with one button press.
Supplied with a durable protective case and MMA lead set with twist type electrode holder.
Runs from 110 and 230V power supplies
WHAT’S NEW
As a result of extensive research and development the EVO Arc160 PFC (EA-160) Inverter Welder boasts a wide range of new features. Firstly, Intelligent Synergic Control allows for pre-programmed setting of electrode sizes for easy operation and setup. The unit includes a selection ability for electrode sizes.
Smart Lift TIG controls the short circuit current at the start consequently avoiding tungsten contamination. Furthermore, the system also identifies accidental short circuits to maintain welding. In addition, the arc length cut off feature eliminates arc wander.
A sleep function to save power kicks in when not the machine has not been in use to reduce energy consumption. A simple push of a button awakens the machine, ready for the next weld. A fan on demand maintains optimum working temperature by starting when required but stops when it is not required, again to decrease energy consumption and noise emissions.
With safety and efficiency in mind, the Jasic EVO Arc 160 PFC (EA-160) is fitted with a voltage reduction device (VRD) and works by lowering the open circuit voltage (OCV) to a safer level. Therefore reducing any potential dangers, since open circuit voltage is produced when a welding machine is switched on and could normally be hazardous by accidentally touching the welding holder or electrode.
Overcurrent and overheat protection is also inbuilt to ensure the machine does not cause damage to itself.
IN A WORD
The EVO ARC has a very straightforward front panel.
From left to right you will first encounter a green button that allows you to switch between between MMA mode and Smart Lift TIG mode.
The second button along allows you to toggle between electrode sizes of 2.5mm, 3.2mm and 4.0mm, in addition there is also a setting that gives the option for a manual custom input.
The third button allows you to switch between amperage control, hot start and arc force.
Furthermore, the potentiometer controlled dial provides a smooth and accurate means of setting your required amperage.
Finally the last button you will notice (4th from the left) lets you switch between the machine controls or a separate wired/wireless remote control which is available as an additional accessory.
SYNERGIC SET UP
The front panel allows the user to select the electrode diameter being used. The machine will then default to a set amperage which is deemed appropriate for the welding rod size. The knob can be used to increase or decrease the amperage within a set range for the electrode size selected.
Rather not use this? No problem – select the dotted parameter and the machine can be used fully manually.
Key Features
- Rugged, ergonomic design
- ClearVision technology – Intuitive user friendly interface
- Intelligent synergic control – Optimal pre programmed amperage settings per electrode size
- Smart Lift TIG – Helps arc starting and helps with accidental touch downs
- Adaptable wide voltage range – Runs from 110V and 230V
- Quick factory reset
- Anti-stick, adjustable hot start and arc force – Easier arc starting, adjustment of arc characteristics and assistance with accidental touch downs
- Dedicated wireless remote control (optional)
- Remote control receiver module (optional)
- Power factor correction (PFC), generator friendly
- ABAP: Active Balancing Air Passage – Efficiently cools whilst keeping particulates out of the components
- Fan on demand – reduced noise and energy consumption
- Voltage Reduction Device (VRD)
- Key power electronic component protection
- Overcurrent and overheat protection
- Complete with protective case and MMA lead
ABOUT THE EVO 2.0 SERIES
Redefined Industrial Design & HMI
(human-machine interface)
- Rugged, robust looks with ergonomic features
- User-centric human-machine interface experience
- Flexible remote control solutions
Solid Welding Performance
- Dash-Arc technology for high frequency TIG
- Smart Lift-TIG arc sensing technology
- Consistent and efficient MIG spot welding performance
- Intelligent synergic control
High Standards in Safety, Reliability, Sustainability
- Power factor correction (PFC) for improved overall energy
efficiency, generator friendliness - Auto sleep mode for reduced energy consumption
- Smart gas for optimized shielding gas consumption
Why buy Jasic
- Incredibly well equipped machines representing excellent value for money
- Built using highest quality components and IGBT’s
- An industry leading 5 year extended warranty (when registered online) gives peace of mind
- In house service work conducted by trained professionals in state of the art facilities
- Welding Inverters fully comply with all safety and quality standards
- In 2016, 1 million models were produced, making them one of the largest welding inverter manufacturers in the world
- Each inverter goes through 42 rigorous test procedures to meet the highest possible standards
- Huge investment in the R&D of welding inverters to ensure they are at the forefront of development in the field
- Free product training on all models provided at the Manchester welding academy
- Validation of machines available, to comply to EN50504:2008 (Please ask)
